The most sophisticated components of the rooftop solar photovoltaic system are the structural system and accessories. Industry standard products have found ways to improve. Niche brands have expanded their lineup to make it more versatile. Regardless of your installation preferences, the market can meet your needs and will generally make your life easier. This buyer's guide is a snapshot of roof installation and shelving products offered by leading brands in the residential and commercial and industrial (C&I) sectors. Click on each product listed to expand for more information.
Roof Tech US is headquartered in Southern California and has a national sales team that can provide quality services to installers and solar panel distributors throughout North America. Since 1994, Roof Tech has been a pioneer in waterproof flexible waterproof panels. Its legacy is directly related to its parent company Yanegiken Technology Research Institute, which was established in 1968 to research and develop new roof technologies. Roof Tech's self-flashing solar mounts, such as RT-APEX and RT-MINI, are known for their efficient and fast installation.
Number of pieces: three to eleven, depending on the configuration. Tools needed: Six certifications: UL 2703,441, ICC ESR 3575, TAS 100, ASTM 2140,1970
Installation: Designed to be fixed to the rafters or directly to the roof terrace (minimum 7/16 OSB) or a combination of the two. Chalk lines are needed to draw the location of the base. There is no need to open the seal of the asphalt shingle because it is a self-flashing system certified by the International Code Committee. It can also be installed on EPDM, TPO and metal roofs. Since mounting screws with a diameter of 5 mm are used when fixing to the rafters, there is no need for pilot holes, and the caulking RT Butyl is self-sealing to create a waterproof mounting system.
Advantages: The operating temperature of the self-flashing bracket made of proprietary butyl rubber (RT Butyl) is between -40 F and 250 F, which exceeds the common sealants used for roofs. In the case of an asphalt roof (shingles), this method can speed up the installation time because it does not need to unlock the existing shingles seal. Because RT Apex is fixed with 5mm stainless steel wood screws, there is no need to drill pilot holes and pre-caulking.
Number of pieces: Two tools required: Five certifications: ICC ESR 3575, UL441, TAS 100, ASTM 2140, 1970
Installation: RT-MINI is Roof Tech's self-flashing mounting base, designed to connect to any traditional rail mounting system and accessories, including conduits.
Advantages: RT-MINI is a universal accessory designed to be independent of any roof type and roof slope, and can withstand wind speeds of up to 180 mph and ground area snow of up to 90 psf. The main difference between RT-MINI and traditional waterproof board is that the installation time is faster, because RT-MINI is fixed with wood screws, no pilot holes and caulking are needed. Therefore, the seal on the asphalt shingles is not damaged, so the roof warranty remains unchanged.
RT-MINI II has more options to install on rafters and to handle thicker insulating materials on low-sloping roofs. We now offer two 90mm screws and offset rafter mounting, allowing more connection options on any style of roof and slope. The new design uses less aluminum, making it a more efficient design that can reduce raw materials and reduce logistics costs.
Dealer List| Website| Email| Webinar
DynoRaxx has been selling professional solar racking equipment since 2009. It is the only solar shelf manufacturer that uses fiberglass as the shelf material for its flat roof ballast solutions. The main advantage is that it is a tool-free system that reduces manual installation time.
Number of pieces: 3 Tools needed: None, 100% tool-free certification: UL 467, UL 2703
Installation: DynoRaxx Evolution FR is easy to transport, stage and install. Installation does not require any tools to assemble, thus greatly saving labor. Advantages: Since the shelf consists of only three main parts and is compatible with every frame-type commercial solar module on the market, no special ordering or delivery time is required. You will receive a product suitable for the job every time.
Number of pieces: 1, provide various lengths (8", 12", 38", 50", 76", 96") Required tools: no certification: UL 467 & UL 2703
Installation: DynoBond is used to ground the solar modules in the array. It is tinned copper wire with a factory crimped stainless steel connector to ground the module.
Advantages: DynoBond can be used to ground solar modules in residential, commercial, industrial and utility scale projects. DynoRaxx uses this product for ballast solutions, and many rack competitors also use it for grounding requirements.
QuickBOLT is a family business dedicated to solving your problems. They believe that solar installation is easier and more affordable for everyone. QuickBOLT provides one of the widest range of innovative solar mounts for residential and commercial roofs in the US market. They are known for their patented Microflashing and BoltSeal power installation solutions, and have been working with installers for nearly a decade to make solar installation easier than ever.
Number of pieces: 3 Tools needed: 1/2" nut holder or 6MM hexagon screwdriver. Sealant (optional) certification: UL certification, PE test
How to install: Place Microflashing on the shingle. Pass the patented double-drive shoulder screw through the rafter until the L-shaped foot is fully secured. When you see the Microflashing mechanical compression seal to the roof, you will know it is safe. We call this technology: BoltSeal. Intertek laboratory ASTM tests confirmed that QB2 can be installed without sealant. QB2 is suitable for asphalt shingles, TPO and EPDM roofs.
Advantages: QB2 has only 3 components and can be installed in less than 30 seconds. Unlike bulky waterproof boards, Microflashing installation does not require lifting shingles or removing nails. QuickBOLT is the only top mount in the industry that uses BoltSeal technology, which allows QB2 to be installed on various asphalt shingles, EPDM and TPO roofs where other waterproof panels cannot be installed.
Number of pieces: 5 Tools needed: Mfg approved sealant. ½” nut holder.
How to install: Install anywhere on the roof. No need to locate the rafters. First place the sealant around the bottom of the T-shaped foot, and then place it on the roof. Insert all 4 hex plates and tighten the screws until the umbrella washers are compressed. (The torque PSI of the drive screw and the correct setting of the umbrella washer should not exceed 57 lbs/inch). Deck installation is suitable for asphalt shingles, TPO and EPDM roofs.
Advantages: Save time by skipping the steps of finding rafters and using deck installation. Use 4 stainless steel screws to install in 20 seconds. The base of the base is embedded with silicon and fixed on the roof with stainless steel screws and assembled with the umbrella gasket to provide excellent fixing and waterproof functions. Deck Mount comes with our 25-year manufacturer's warranty. L-Foot is built into the mount and provides all the required hardware at a very low cost.
Number of pieces: 3 Tools needed: Recommendation: drill bit, sealant compatible with roofing materials Certification: UL certification
How to install: Remove the tiles from the installation area. Find and mark the rafters. Place brackets and pre-drill holes. Fill the pre-drilled hole with sealant. Tighten the mounting screws to fix the bracket and put the tiles back on the bracket.
Advantages: QuickBOLT's multifunctional full-tile roof supports can be used for flat or curved tile roofs. Extensive adjustability and lever points ensure that you can use these mounts with any tile roof style and work around rafters that are inconveniently located.
Number of pieces: 3 Tools needed: 1/2" nut holder or 6MM hexagon screwdriver. Sealant (optional) certification: UL certification, PE test
How to install: Place Microflashing. Pass the patented double-drive shoulder screw through the rafter until the L-shaped foot is fully secured. When you see the Microflashing mechanical compression seal to the roof, you will know it is safe. Intertek laboratory ASTM tests confirmed that QB2 can be installed without sealant.
Advantages: QB2 is not only suitable for asphalt shingles. Use the same simple steps to install QB2 directly to the roof of TPO and EPDM, saving you installation time and money. QuickBOLT's patented BoltSeal technology is very powerful, you don't need to rely on chemical sealants for waterproofing, saving you an extra step on the roof.
Number of pieces: 4 Tools needed: Drill with a 3/16 inch drill bit, M6 deep socket hex wrench, ½” wrench
How to install: find rafters and pre-drilled holes. Put the 5/16" X 5 1/4" screw together with the umbrella washer and tighten it until the washer is compressed. Insert the L-shaped feet and nuts and tighten them until they are secure.
Advantage: Our most versatile metal roof bracket. The bracket is quick and easy to install, and provides a safe clamping force.
Number of pieces: 2 (only blocks and screws. Clips are not included) Tools needed: 3/8" hex screwdriver
How to install: Insert the screw into the duct clamp and EPDM block. Drive until the block is compressed. No need for pre-drilling.
Advantages: Our electrical conduit solutions provide great flexibility in bundling cables and wires. Designed to fix and support catheters.
List of distributors: Wesco, CED Greentech, CES, Codale Electric Supply, Cooper Electric, Beacon Solar Products, Griprac, Independent Electric Supply, Onesource, Ontility, Tamarack Solar Products, The Solar Raq, Yuens Factory, Boral Roofing, Chiko Solar, Platt Electric supply, Krannich Solar, Soligent, etc...
IronRidge is an Esdec company that designs and manufactures structural hardware for residential and commercial solar systems. For nearly a quarter of a century, IronRidge has been working closely with solar professionals to create powerful, streamlined, and cost-effective products. IronRidge has passed ISO 9001 NSF certification and maintains the highest quality management standards.
Number of pieces: /- 10 Tools needed: cordless drill (non-impact type); impact driver (for square head bolts); torque wrench (0-250 inch pounds); 7/16" socket; 1/2" socket; 9/16" sleeve; 7/32" drill bit; 1/8" drill bit; 1/4" drill bit; T30 drill bit; channel lock pliers; #3 Phillips drill bit certification: UL 2703 certification, Class A fire rating, water seal rating , Designed and certified to comply with international building codes and ASCE/SEI-7, Florida product approval #FL29843
Installation: 1. Connect the base 2. Place the guide rail 3. Fix the lug 4. Fix the module
Advantages: Every component in the IronRidge XR embedded installation system has been subjected to extreme tests and verified in extreme environments: rain, wind and snow. Our rigorous approach has resulted in unique structural features such as curved guide rails, universal fastening objects, innovative tile attachments and reinforced waterproof panels. All our products are fully certified, compliant with specifications, comply with UL 2703 standards and have a 25-year warranty.
Number of pieces: /- 8 Tools needed: cordless drill (non-impact type); impact driver (for square head bolts); torque wrench (0-250 inch pounds); 5/16" socket; 7/16" socket; 9 /16” socket (deep); String Line certification: UL 2703 certification, Class A fire rating, design and certification comply with international building codes and ASCE/SEI-7
Installation: 1. Connect the base 2. Add inclined legs 3. Place the guide rail 4. Fix the lug 5. Fix the module
Advantages: Build a strong and efficient solar cell array on a flat roof. IronRidge Tilt Mount supports a wide range of solar panel tilt angles, while also resisting the extreme wind and snow forces experienced by the building throughout its life cycle. The tilt installation system has passed UL 2703 certification and is compatible with most roof anchor products. Every component in the system is made of aluminum and stainless steel to ensure complete corrosion resistance.
Number of pieces: /- 5 Tools needed: Torque wrench (0-250 inch pounds); 9/16" socket; 7/16" socket; 1/2" socket; string chalk line certification: UL 2703 listed, Class A Fire rating, design and certification comply with international building codes and ASCE/SEI-7, IFI wind tunnel test
Installation: 1. Mark the layout 2. Place the chassis 3. Install MLPE (optional) 4. Lay the ballast 5. Anchor system (optional) 6. Install the module 7. Fully glue
Advantages: IronRidge BX provides excellent power density and design flexibility for flat roof solar arrays. The BX chassis is made of glass fiber reinforced composite materials, designed to withstand extreme structural loads, but its shape is also suitable for roofs and easy to install.
SunModo, which means "Road to the Sun", is an American private company headquartered in Vancouver, Washington, focusing on providing innovative racking and installation solutions for professional installers in the fast-growing solar industry. SunModo's solar racking solutions are used in 15 countries, from Hawaii to Connecticut, and their commitment to innovation can be seen in their product line, which includes more than 20 patents, from residential roofs to large-scale ground installations.
How to install: A tool kit and Pop-On technology enable fast and hassle-free installation. The quick and easy Pop-On L-shaped foot adapter speeds up installation and eliminates old T-bolts. The guide rail is quickly and safely inserted into the adapter. Full structure bonding and splicing, single bolt installation is quick and easy. Bonding Pop-On Universal Mid Clamps are suitable for PV module frame heights from 30mm to 50mm. The clip can easily spring into the guide rail and stay upright on the guide rail for easy adjustment of position. The Pop-On universal end clamp can provide quick and easy installation of any module thickness with a single SKU. Pair SMR with one of our industry-leading installation options to save money and time for your residential solar installation. To learn more about SunModo's SMR system interactively, please watch this video.
Advantages: SunModo launched the SMR pitched roof system, which is the most valuable pitched roof installation system on the market. The SMR system represents a huge leap in shelf technology. The optimized design makes the SMR rail not only the lightest but also the strongest rail on the market. With quick and easy pop-up clamps and L-shaped foot adapters, professional installers can install, adjust and secure PV panels with just one tool. Whether it is rafters or decks, vertical or horizontal, the SMR system is the ideal solution for your solar installation. Save materials and installation time.
Number of pieces: 2 Tools needed: 6 mm hex screwdriver or 1/2" hex socket screwdriver Nano Deck installation: 3/8" hex socket screwdriver Certification: High-speed hurricane zone approval-Pass TAS 100 (a) wind driven rain test.
How to install: As an additional precaution, SunModo recommends placing a ring of sealant on the bottom of the base-but the high-performance gasket means that NanoMount does not only rely on the sealant used by the user to provide protection. Both rafters and deck attachments are available, so NanoMount can flexibly cover various scenarios and preferences. For rafter applications, position the center of the rafter at the desired roof position and drill a 6 mm pilot hole. Fill the pilot hole with sealant and use a 6mm hex screwdriver or 1/2" hex socket screwdriver to install the lag screw with sealing washer. For paving applications, find the desired roof position and install 4X with sealing self-tapping screw washer. Use SunModo's SMR rail system completes the installation of solar panels.
Advantages: Damaged roof tiles used to be one of the biggest challenges faced by solar installers. SunModo's newly patented NanoMount eliminates the need to lift shingles and significantly reduces installation time. NanoMount has an integrated ultra-soft weather sealing gasket that covers the entire bottom of the mount and is recessed to ensure proper compression. Super soft materials are suitable for uneven roof surfaces. There are no pre-punched holes, so huge gaskets are sealed around the screws to achieve excellent leakage protection on the roof surface. The pre-assembled sealing gasket comes with lag bolts or deck screws to prevent water from penetrating from above. NanoMount has a multifunctional base, which can be used for rafter or deck installation, which can flexibly cover various scenarios and preferences.
How to install: SunTurf easily achieves a leading edge height of 7 feet at low cost and provides a convenient roof surface for maintenance and repair. No cutting, welding or drilling is required. Adjust the height and install the column with fixing screws. The pipe fittings are quickly connected with fixing screws. The two-piece cap makes installation easy. Structural joints with fixing screws for bonding. Fast track attachment with T-bolt.
Advantages: The SunTurf flat roof system is very suitable for lifting obstacles above HVAC, ducts and vents. The streamlined design combines the simplicity of a pipeline-based system with the next level of engineering. The aluminum rail can be connected to the horizontal pipe without drilling holes. The system can easily achieve cost-effective leading edge heights of 7 feet or more. By crossing roof barriers, the system makes full use of the available roof surface, thereby maximizing the size of the photovoltaic system and increasing the return on investment. The system can also easily access the roof surface for maintenance and repairs.
Number of pieces: 1 Tools needed: refer to page 10 of the vertical seam guideless installation manual Certification: UL2703
How to install: We provide two different vertical seam guideless fixtures to meet your specific project needs. For the 1-inch vertical seam railless kit, the fixing screws are installed at a 10 degree angle to speed up the connection of the fixture to the roof. It is no longer necessary to hit the tool on the roof to access the fixing screws. The 2-inch vertical seam clamp can be installed in situ at the desired seam connection position. With this unique two-part assembly, there is no need to slide the clamp up onto the roof line.
Advantages: SunModo's vertical seam guideless system is a middle clamp and end clamp assembly, all rolled into one. It is suitable for almost any vertical seam roof profile. This pre-assembled universal accessory is the only accessory required. This unique clamping kit can hold photovoltaic panels ranging in height from 30 mm to 50 mm. The oval end fixing screws can prevent damage to the roof panel during installation. We provide two different vertical seam guideless fixtures to meet your specific project needs.
Number of pieces: 3 components for TopTile rafters, 4 components for TopTile deck installation Tools required: 28 mm hex socket Certification: High-speed hurricane zone approval-Pass TAS 100 (a) wind driven rain test.
How it is installed: Our patented TopTile eliminates the need to disassemble the tiled roof, and significantly reduces time and minimizes tile damage during installation. The bracket is suitable for flat and curved tile contours. TopTile Mount can be used to install directly on the roof terrace without removing the tiles. When installing TopTile Deck Mount, first drill a 1-1/2 inch hole in the tile. The 28mm hex socket is used to install the TopTile pillar into the roof deck. Before installing the three wood screws, spray the insulating foam sealant onto the roof deck through the three holes of the pillars. The waterproof board is simply formed by hand to adapt to any tile shape to provide a completely waterproof installation. Connect the L-shaped feet to the pillars. Use SunModo's SMR track system to complete the solar panel installation.
Advantages: There is no need to lift roof tiles, shattered tiles or search for rafters. Use SunModo's new TopTile Mount to say "yes" to the tiled roof. SunModo's innovative TopTile Mount is the world's first photovoltaic installation system that is completely installed above the tiles. The patented bracket eliminates the need to disassemble the tiled roof, and significantly reduces installation time and minimizes tile damage. The system also allows installation on the ridges of curved tiles to provide excellent water leakage protection. The TopTile installation system has two installation options. The panel can be fixed 4-7 inches above the tile surface, using pillars with waterproof gaskets and plastic waterproof panels. Installers can choose SunModo's patented deck installation system when anchored to the deck or rafter installation system.
Magerack designs, manufactures and sells innovative solar installation systems for rooftop solar installations. Magerack solar mounting system and MageMount trackless mounting system are reliable, easy-to-install and cost-effective turnkey solar mounting solutions. In addition, Magerack offers a variety of innovative roof accessories for installing solar energy on residential, commercial and industrial metal roofs.
Number of Pieces: Five Tools Needed: 1/2" Hexagonal Socket Certification: UL 2703
Installation: It is a track-based solar installation system for solar installation on composite shingles, ceramic tiles and stone-coated steel roofs.
Advantages: reliable, easy to install, cost-effective
Number of pieces: Two tools are required: 1/2" hex socket Approval: UL 2703
How it is installed: It is a trackless solar installation system for installing solar energy on composite shingles, ceramic tiles and stone-coated steel roofs. It has only two components, Module Connector and Comp Foot. The Comp pin is connected to the roof and also fixes the solar module. The module connector connects two adjacent solar modules to improve stability and adhesion.
Advantages: lower cost. Easy to transport, carry and install.
Number of pieces: one piece of tool needed: 1/2" hexagon socket certification: not applicable
How to install: L-shaped feet with waterproof panels are roof attachments for composite tile roofs. Fix the waterproof plate by connecting it to the vertical part of the L-shaped bracket with bolts.
Advantages: It has a unique patented waterproof design, and the waterproof surface is non-porous and absolutely waterproof. It is simple in design and intuitive to install.
Number of pieces: Two tools are required: 1/2” hex socket and 3/16” hex wrench. Certification: UL 2703
How to install: Each kit has two components, MageBlock and middle or end clips. MageBlock is fixed on the vertical seam with two fixing screws. The middle clip or end clip slides on the top of the MageBlock and fixes the solar module to the MageBlock.
Advantages: It has only two pre-assembled components, the middle clamp installation kit and the end clamp installation kit. Each kit is 3"x3"x1", and multiple kits can be installed in one box. The cost is only one-third of the rail-mounted system, and the installation is convenient.
Number of pieces: one piece (three different versions) Tools needed: hex socket Certification: not applicable
How to install: MageBracket R or CH has two angle-adjustable brackets that can be attached to the sides of the ribs for better waterproofing. MageBracket CL has two adjustable width brackets, which can be installed on top of ribs on corrugated metal roofs.
Advantages: The angle-adjustable and width-adjustable rib mounting bracket is suitable for the most common R-Panel trapezoidal and corrugated metal roofs. They have better water resistance and are strong roof attachments, with mounting screws attached to the sides of the ribs or structural elements. The optional L-bracket is ready to be installed on the rail.
For 40 years, OMG Roofing Products has been a leading supplier of fasteners and other products that are used exclusively in commercial roofing applications and to secure commercial roofs to decks. OMG works with all major roof system manufacturers, and its field sales representatives are on commercial roofs every day.
Number of pieces: 2 Tools needed: screw gun, wrench, torque wrench, waterproof cushion sealant, OMG roof fasteners.
How to install: The OMG PGU-7 unit is equipped with four roof fasteners for specific deck types. Fasteners should be installed using a standard screw gun rather than an impact driver, and the cap bolts must be secured to 60-70 inch pounds in a cross pattern. Waterproof sealant beads are installed around the periphery of the bottom of the top plate to provide additional protection.
Advantages: Suitable for all commercial roof types (ie TPO, PVC, EPDM, modified bitumen and BUR), but not compatible with residential tiles or ceramic tiles. In addition, for most ballasts and track-based commercial solar rack systems. PGU-7 is directly fixed on the deck, and does not need to be fixed on structural parts. This usually eliminates the need for a ballast and protects the insulation from compression. The PGU-7 device does not leak water and does not flash water, which saves labor and does not need to supply power to the roof during installation. The device can be installed in about four minutes. PGU-7 provides a tensile strength of 2,051 lbf (9.12 kN), a shear strength of 1,581 lbf (7.03 kN), and a compressive strength of 2,214 lbf (9.84 kN).
Number of pieces: 1 Tools needed: screw gun, fastener gauge card (provided), thermoplastic roof hand welder, OMG roof screws.
How to install: PowerGrip Standard is secured through the roof and deck using recommended roof fasteners, and the deck penetration depth is at least 3 ⁄4 inches. [20 mm] into steel, 1 inch. [25 mm] into wood. The fastener head should be firmly fixed to the gauge card, but should not be overdriven. Slide the PowerGrip assembly over the head of the fastener. The device should be tightly attached to the roof membrane. The PowerGrip flange is heat welded to the roof membrane according to the manufacturer's specifications, and the cut edges are sealed as required.
Advantages: made of the same thermoplastic (ie TPO or PVC) film as the roof. water proof. Helps protect the single-layer roof cover from damage caused by the movement of the ballast rack. Can help eliminate some ballast to reduce the excessive weight of the roof. Remove the wind load from the roof cover and place it on the structural deck to which it belongs. Provides 305 lbf (1.35 kN) tensile and shear strength. Only used for ballast systems on POV or TPO roof membranes.
Number of pieces: 1 Tools needed: screw gun, fastener gauge card (provided), thermoplastic roof hand welder, sealant. Certification: Not applicable
How to install: PowerGrip Standard is secured through the roof and deck using recommended roof fasteners, and the deck penetration depth is at least 3 ⁄4 inches. [20 mm] into steel, 1 inch. [25 mm] into wood. The fastener head should be firmly fixed to the gauge card, but should not be overdriven. Slide the PowerGrip Plus assembly over the head of the fastener. Then lift the flange and install eight additional fasteners through the PowerGrip Plus board, hitting the top groove. The device should be tightly attached to the roof membrane. The flange is heat welded to the roof membrane according to the manufacturer's specifications and the cut edges are sealed as required.
Advantages: made of the same thermoplastic (ie TPO or PVC) film as the roof. water proof. Helps protect the single-layer roof cover from damage caused by the movement of the ballast rack. It can help eliminate ballast and reduce the weight of the roof. Remove the wind load from the roof cover and place it on the structural deck to which it belongs. Provides a tensile strength of 2,000 lbf (8.90 kN) and a shear strength of 1,075 lbf (4.78 kN). Only used for ballast systems on POV or TPO roof membranes.
Number of pieces: 2 Tools needed: screw gun, wrench, torque wrench, waterproof sealant, OMG roof fastener.
How to install: The OMG PGU-11 unit is installed with six roof fasteners for specific roof deck types. According to the star pattern provided on the base plate, the fasteners should be installed using a standard screw gun instead of an impact driver. Coat the periphery of the bottom of the cover with a layer of waterproof cushion sealant. Align the cover with the base plate and secure it in place with the four bolts provided with a torque of 60-70 pounds.
Advantages: Suitable for all low-slope commercial roof types (ie TPO, PVC, EPDM, modified asphalt and BUR), and compatible with most ballasts and track-based commercial solar rack systems. PGU-11 is directly fixed on the deck, thus directly transmitting wind lift and static load to the structural members. This usually eliminates the need for a ballast and protects the insulation from compression. The PGU-11 device does not leak or flash water, which saves labor and does not need to supply power to the roof during installation. Provides a tensile strength of 3,343 lbf (14.8 kN), a shear strength of 2,537 lbf (11.3 kN) and a compressive strength of 2,749 lbf (12.2 kN).
EcoFasten is an Esdec company that provides easy-to-install and cost-effective solar photovoltaic roof mounting and racking systems for the US solar industry. The company has been in business since 2007, and its extensive portfolio of patented waterproofing solutions can be used in configurations of various roof types.
Number of pieces: 4 Tools needed: 1 tool (1/2 inch deep hole sleeve) Certification: UL 2703 compliant
Installation: Installing a trackless RockIt system on a composite tile roof is not only one of the most economical solutions on the market, but also one of the fastest and easiest to install, thanks to the use of a single fastener. After installing the RockIt Slides waterproof board and leveling the edge of the eaves, continue to install the first row of RockIt mounts, array skirts and couplings. All that remains is to install the PV module and continue to install the uphill bracket and coupling. Level the rest of the system at any time, or level after the installation of the photovoltaic array.
Advantages: The RockIt system is the industry's premier trackless photovoltaic racking system, which can be used to combine shingle, tile and metal roof type configurations. RockIt is designed in accordance with the needs of installers, can be installed quickly and easily with a single tool, and uses EcoFasten's patented waterproof technology. With convenient, easy-to-position alignment slide rails and top-down leveling system, RockIt is logically intelligent and does not require transportation or long rails. The RockIt system provides simplified installation, fully integrated bonding, and north-south adjustability. The components are finished in black to complement commercial and residential applications. RockIt complies with UL 2703.
Number of pieces: 8 pieces, with middle clamp and end clamp. Tools required: one tool (1/2 inch deep hole sleeve) Certification: UL 2703 compliant
ClickFit on Tile: ClickFit is one of the fastest installation rail racking systems in the industry, thanks to the snap-in rail assembly. ClickFit provides installers with the versatile accessory options they want and is most cost-effective when installed on tiled roofs.
First, install ClickFit Tile Hook and replace the moved and/or removed tiles, or install Tile Hook Flashing. Next, install ClickFit Tile Hook Sub-Flashing to provide an additional layer of waterproof protection.
Place the rail in the clickers and roll the rail into each clicker-you should hear a "click". If necessary, level it, then install the ClickFit end clamp (at the end where you started) on each rail, place the PV module, align and tighten it.
Advantages: ClickFit complies with UL 2703, has a fully integrated bonding function, and is one of the fastest installation speed rail-based systems in the industry. Thanks to its snap-in rail assembly, the rail can be connected to any EcoFasten composite shingle, ceramic tile and metal roof support in seconds, without the need for fasteners or tools. The middle clamp and end clamp are compatible with photovoltaic modules with a thickness between 30-55 mm.
The ClickFit system is made of sturdy materials such as aluminum and coated steel to ensure corrosion resistance and overall product life. ClickFit has been tested in extreme weather conditions including wind, fire and snow.
Number of pieces: 3 Tools needed: Two tools (3/8” Allen bit and ½” driver for intermediate clamp and coupling) Certification: UL 2703 compliant
How to install: SimpleBlock-PV uses pre-installed two elliptical point fixing screws, which can be installed super fast on a metal standing seam roof. To attach SimpleBlock-PV, place the block (clip) on the standing seam and lift the block until the lip engages the underside of the folded metal roof seam, then tighten the fixing screws to 150 inch pounds.
Install the first row of blocks using end spacers and intermediate clamps. The block with the middle clamp connects the adjacent north-south photovoltaic modules, and the coupling connects and connects the east-west adjacent photovoltaic modules. Install the remaining blocks, middle clamps, couplings and PV modules on the uphill layer as needed.
Advantages: SimpleBlock-PV is an innovative trackless racking system for metal vertical seam roofs. The system uses EcoFasten End Spacers and Mid Clamps with integrated bonding, while the block (clamp) uses two pre-installed oval point fixing screws to ensure quick and easy installation without worrying about these tiny components rolling from the roof or Falling. Maintaining the integrity of the roof is EcoFasten's top priority. The three-component system utilizes the gap technology, eliminating the need to penetrate the roof material. SimpleBlock-PV is suitable for most double-lock vertical seam metal roof profiles, has north-south adjustability, and complies with UL 2703.
Number of pieces: 4 Tools needed: two tools (Phillips head and ½" socket)
How to install: After determining the installation location and cutting the roof and insulating material to accommodate the bottom plate, install the waterproof plate on the two studs on the bottom plate, and then install EPDM sealing washers on the two studs. Place the F-202 compression bracket On the threaded studs, and place an adhesive washer on each stud with the rubber side facing the roof. Before adding the hex nut, screw it down from the stud onto the compression bracket. Install and tighten the hex nut of each threaded stud. Next, connect the mounting bracket or column of your choice to the F-202 using the included full thread, and finally waterproof the EFL-BLK-1014 according to the specific technology of the roof membrane.
Advantages: ECO-65 is a professional direct-to-deck attachment for low-slope roofs. Roof attachments are specifically designed for new or existing (renovated) low-slope roofs made of rolled asphalt or films (TPO, EPDM, PVC). ECO-65 is used by countless ballast solar racking system manufacturers to increase their products to reduce weight and shock resistance. The ECO-65 base plate is designed for fixing on wooden blocks or wooden floors. The mounting base itself has two fixing studs, allowing the use of larger compression brackets when needed. ECO-65 is a waterproof solution compatible with any shelf system.
Number of pieces: 4 Tools needed: two tools (¼” hex socket, ½” socket) Certification: UL 2703 compliant
How to install: Determine the array layout, mark the center of the corrugation, and draw a straight line to indicate the installation position of the installation profile. Carefully check the width of the ridge (minimum 3/4") and metal thickness (minimum 26ga). The number of screws will determine the number of screws required. Use self-piercing screws and a cordless drill with a ¼-inch hex socket to connect the mounting profile. Perforated screws are applied perpendicular to the roof surface to form a waterproof seal. Next, install end clips on the first two installation profiles closest to the eaves. Fix the lower end clips to the installation profiles, and then "click" the clips on the side flanges . Place the first module, align and slide the end clamp to be flush with the module frame. Tighten the end clamp and start installing the middle clamp. Use the middle clamp phono as a spacer for the consistent EW gap between the modules, by aligning each column The module repeats these steps to complete. Advantages: The RibFit system is an easy-to-install four-component railless solar racking system designed for metal roofs. The RibFit system complies with UL 2703 standards and consists of an aluminum directly connected to the top of the metal panel ribs Slider composition. Compared with track-based systems, minimal components and integrated connection pins reduce installation time. RibFit installs the modules in a horizontal manner and is compatible with most metal R-shaped panels and trapezoidal roof panels with a ridge width of ¾ Inches or larger, 26 gauge or thicker. The RibFit system uses three levels of waterproof protection, which can extend the service life and give you peace of mind.
Number of pieces: 4 Tools needed: one tool (½" sleeve)
How to install: QB-1 on tiles: QB-1 The strong, versatile column and base make it an ideal solution for installing solar energy on tiled roofs. First, find each row of mounts and mark them. Align the vertical fastener holes of the QB-1 base with the center rafter mark, and then align the horizontal fastener holes with the aligned row line. Remove the QB-1 base and place it on the pre-drilled and backfilled pilot holes and fix the fasteners. Fix the column to the QB-1 base.
After the cushion is laid, install the tile-level waterproofing board, cut where needed, and let the pillar pass through it. Put the cut tiles back in place and apply sealant where the pillars and the waterproof board meet. Connect the required brackets or L-shaped feet to complete the installation.
Advantages: The super-strong and versatile QB-1 rail-based racking system includes a base that can be connected to various roof types, including composite shingles, ceramic tiles, shakers, slates and metal tiles. QB-1 is an ideal solution for new residential construction projects because it allows roofing or tiles to be laid around the installed brackets. Aluminium cone waterproof board with a size suitable for the column can also be provided. Simply combine the base with the column height of your choice (4.5 inches or 6.5 inches column height is available), choose your waterproof board (12" x 12" or 18" x 18"), and then choose the bracket you want .
Point Load Power is a clean technology company that leads the development of commercial and industrial (C&I) building rooftop solar tracking while providing high profits for each partner and stakeholder.
Number of pieces: 12 Tools required: socket wrench, crimping tool Certification: CSA for UL 3703
How to install: PV Booster is mechanically connected to the flat C&I roof. The three main subsystems can be quickly installed by screwing our tripod (support system) to the mechanical attachment (included), bolting to the drive mechanism (actuator) and installing the h-frame (panel support). Then install the panel on the h-frame. The system is connected to our tracker distribution box (control hardware) installed on the roof in 30 or less strings. The 30-degree tilted vertical axis tracker significantly increases energy production, and a distance of approximately 1 foot is required between the panels for a full range of tracking motion to achieve this goal. A small wall-mounted control computer is installed in the mechanical/electrical room near the inverter to ensure that it can still work normally when the site loses Internet connection.
Advantages: PV Booster brings tracking to the flat C&I roof, and significantly improves system efficiency with a smaller footprint, thereby significantly reducing the LCOE of the project. PV Booster allows owners to use less equipment to generate more energy from each panel. Our system generates 30-40% more energy from each single-sided panel. PV Booster is also the best installation solution for double-sided modules, which can generate up to 70% more energy from double-sided panels. Use roof tracker PV Booster to produce more at less cost.
The modules are connected by a cable clamp/end clamp made of precision-machined aluminum, which clamps all 4 sides of the frame to achieve a firm connection. Supports horizontal installation and clamps 12 inches on long rails. The bucket has a built-in reference tab to help install modules.
Advantages: simple and innovative one-piece stackable design. No assembly required. It can be installed on any low-spacing surface (roof and ground installation, compatible with all frame modules). Fast transportation, stage and installation. All top-down connections use one tool. There are 5, 6 and 10 degree tilt options (GCR 72-80%). One-piece slider for connecting jumpers from EW module to module ground. The flexible system adapts to the contours of obstacles and uneven surfaces. Made of UV resistant glass reinforced nylon 6. "A" Class Fire Class 1, 2 and 3 modules. The transport power of each pallet is 25 kilowatts, and the transport power of a 40-foot container is 750 kilowatts.
Since 1992, S-5! Has always been the authority on metal roof accessory solutions. S-5!'s zero penetration fixture connects auxiliary equipment to the Standing Seam Metal Roof (SSMR) while maintaining the roof warranty. All S-5! The product provides a warranty for the lifetime of the roof (and solar). S-5! products are manufactured in an ISO 9001-15 certified US factory and have been used on more than 2.5 million rooftops worldwide, including 3.5 GW of photovoltaics.
Number of pieces: 2 Tools required: Electric screw gun (drill bits provided) Certification: Material-ASTM B 221-04A, B 308/308M, B 597, B 807, E 527-83, A 276/276M; Manufacturing-ISO 9001- 15; Performance Laboratory Test-ISO 17025; Product Evaluation-ICC-ES (Evaluation Report ESR-3869)
How to install: S-5-N clamp can be used for rail mounting or Direct-Attach™ without rail. With angled fixing screws, installation is quick and easy. Place the insert close to the desired clamp location at the bottom of the seam. Place the clip on the seam and insert it. Use the provided Torx tip to tighten the set screw against the insert to the specified tension. Then, for the rail system, use stainless steel M8 bolts (supplied separately) to fix the rail (or L-shaped feet). Or, for no rails, simply screw the pre-assembled PVKIT into the bolt hole on the top of the fixture. You are ready to lay out the modules!
Advantages: S-5-N fixtures are custom-designed for popular 1" nail bar standing seam profiles, which are commonly used in residential and light commercial roofs. There are two models to choose from: Standard (2 screws) for heavy-duty , Load-critical applications, S-5-N-Mini is lower cost, suitable for most photovoltaic applications, suitable for track installation systems or S-5-PVKIT.
The advantages include: No need for special tools, excellent corrosion resistance and strength retention, and innovative plug-ins for easy installation. It retains the roof warranty and ensures that the clip position on the seam is straight. The published engineering application tests remain strong. Ensure the service life of the roof and photovoltaic.
Number of pieces: 1 (pre-assembled) Tools needed: screw gun, rope, 5/16” and 1/2” drive socket Certification: Material-ASTM B 221-04A, B 308/308M, B 597, B 807, E 527-83, A 276/276M; Manufacturing-ISO 9001-15; Performance laboratory testing-ISO 17025
How to install: ProteaBracket is a universal bracket used to connect rails or S-5-PVKIT to trapezoidal ribs (exposed fastening metal profiles), with a top width of up to 3 inches (76 mm). It is directly fixed to the side surface of the roof panel through pre-punched holes. Stainless steel cover, self-piercing S-5! Including fasteners and Protea L-Foot. ProteaBracket does not need to find a structural location, and can implement modules, PVKIT or rail attachments anywhere on the roof.
When using side-mounted rails, place the Protea L-Foot vertically so that the hinge bolts will lock in the square holes on the slotted L-Foot. Tighten the hinge bolts. The rail will now be connected to the remaining slots to fine-tune the rail height. When using ProteaBracket to install PVKIT or top-mounted rails, please place the L-shaped feet horizontally. Tighten the hinge bolts.
Advantages: Complete all work in one part. When fully assembled, ProteaBracket connects the PV with or without guide rails to the exposed and fastened trapezoidal profile, including pre-assembled foam core panels/insulated metal panels. The adjustable base can adapt to different rib widths, heights and angles. Only stick to the sheet, do not use messy sealant. Equipped with factory-applied EPDM mats to ensure quick installation and weatherproof fit. After rigorous load-to-failure testing, the results are limited to sheets; paired with PVKIT to achieve a direct connection solution-or ideal for side bolt and bottom bolt rail installation. Same as all S-5! Product, ProteaBracket guarantees the service life of the roof (and photovoltaic); Resi or C/I.
Number of pieces: 1 or 2, depending on the roof profile details. Tools required: Electric screw gun (drill bit provided) Certification: Material-ASTM B 221-04A, B 308/308M, B 597, B 807, E 527-83, A 276/276M; Manufacturing-ISO 9001-15; Performance Laboratory Test-ISO 17025; Product Evaluation-ICC-ES (Evaluation Report ESR-3869)
How to install: Use the threaded holes on the fixture (stainless steel hardware provided) to install photovoltaic modules, snow protection devices, service walkways, lightning protection devices, conduits, wire ducts, component-level power electronics, fall protection devices, etc. All use industry common tools, the installation is so simple; it can be completed by the DIY installer. Just place S-5! Clamp the seam at the desired location and tighten the fixing screw to the specified tension. M8 threaded holes are provided in all fixtures for connecting to L-foot (rail system) or S-5-PVKIT (direct connection™) system without the need for a rail.
Advantage: S-5! The clamps are designed for brand-specific vertical seam roof types, specifications and materials to maximize the cost/maintain strength ratio. One size fits all fixtures will affect cost or performance. All "mini" fixture versions are sufficient for photovoltaic installations. It is compatible with any track system and does not require roof penetration. Compatible with S-5-PVKIT for direct connection system (without guide rail). More than 500 metal roof profiles have been independently tested for engineering applications. Ensure the service life of the roof (and photovoltaic). Available in brass and stainless steel
Number of pieces: 1 (fasteners sold separately) Tools required: electric screw gun, 3/8" hex socket, 13 mm (or 1/2") hex socket Certification: Material-ASTM B 221-04A, B 308 /308M, B 597, B 807, E 527-83, A 276/276M; manufacturing-ISO 9001-15; performance laboratory testing-ISO 17025
How to install: Install SolarFoot for your selected guide rails and L-shaped feet: 1. Determine the position of the roof support structure; wipe off excess oil and debris from the desired installation position; 2. Tear off the release paper from the base, Align and stick to the roof surface of the structure; 3. Install the screws into the structure below through the prefabricated holes in the SolarFoot; and 4. Install the L-shaped feet of the guide rail manufacturer on the studs and use the provided M8-1.25 Hex flange nuts hold it in place and tighten to 160 in-lbs (13 in-lbs).
Advantages: Suitable for all exposed and fastened metal roofs, and compatible with L-shaped foot assemblies of all rail manufacturers. Connect to the structure or deck to obtain the best holding strength. Fixed on a variety of substrates, including wooden decks, wood or steel purlins. The correct choice of sealant is no accident; there is no messy or risky field application of sealant. The low center of gravity reduces the moment arms normally associated with L-Foot/rail solar racks. Stainless steel integrated studs and locking flange nuts hold the L-shaped feet in place. Load test for engineering applications. Guarantee the service life of the roof (and photovoltaic)
Number of pieces: 3 Tools needed: screw gun (drill bit provided), calibrated dial torque wrench Certification: material-ASTM B 221-04A, B 308/308M, B 597, B 807, E 527-83, A 276/276M; Manufacturing-ISO 9001-15; Performance Laboratory Testing-ISO 17025; Electrical Connection and Grounding-UL 2703; ETL 1703
How to install: S-5-PVKIT 2.0 can be easily plugged into any S-5! Fixtures or brackets. Eliminate railways completely. The disk with engaging teeth provides a ground path from the module to the module. The grab is fixed to the PV module frame by using a simple clamp and grab tool, thereby providing a continuous ground path without the need to install additional components along each module column.
PVKIT's pre-assembled components provide a simple, safe and economical way to "lay and use" modules. The PV module itself is a size ruler used to place subsequent accessories. Finally, screw the grab onto the module frame. No additional tools or steps are required. The inherent "free" rails (ribs and seams) of the roof avoid the need to add rail hardware.
Advantages: S-5-PVKIT 2.0 is a trackless connection solution, suitable for any metal roof type, through testing, design, directly connecting the module to the standing seam or exposed fastening metal roof. PVKIT uses high-strength, certified aluminum and stainless steel, eliminates the need for traditional guide rail methods, and provides considerable savings in the transportation and handling indicators of the photovoltaic installation system. You are using the rails inherent in metal roofs. Advantages compared with guide rails: 85% reduction in weight/incidental load; 70% reduction in components; up to 40% savings in hardware; up to 40% labor savings; 25% better load distribution.
Since 2007, SnapNrack's solar mounting products are designed to reduce installation costs, improve installation quality and safety. The SnapNrack roof and ground mounting system has a single tool installation, pre-assembled snap-in hardware, integrated wire management, integrated grounding/connection, and a Class A fire rating that meets the UL2703/UL1703 standard.
Number of pieces: 5 (rails, mounting parts, joints, intermediate clamps and end clamps) Tools required: ½" sleeve, all connections and accessories have impact gun certification: UL 2703 for grounding/connection, Class A fire rating type 1 and type 2 modules, UL approved module, stamped structural engineering report
How to install: The installation of SnapNrack Ultra Rail is very intuitive and easy to learn. After marking the array according to the design plan, Umbrella L Feet will use patented waterproof technology to prevent roof leakage and be embedded in rafters. The guide rail is clamped into the mounting seat with spring loading function, so that the guide rail can be easily slid and adjusted to the required position and height. Finally, place the panel on the rail fixed with SnapNrack's proprietary mid-end and end clamps because the wires are firmly embedded in the rail channel.
Advantages: The Ultra Rail profile creates a channel for the wires, which is not hindered by connectors or mountings. It does not rely on cable ties, which will fail over time, creating a chance of wire damage or worse. The spring-loaded bracket allows the rail to snap into place and release without tools, and slide easily before leveling and tightening. SnapNrack does not rely on T-bolts that may be bound or improperly installed and cause system failure. The roof penetration is protected by a patented taper waterproof function that extends above the bottom of the roof attachment and is sealed under a proprietary Umbrella Lag.
Number of pieces: 4 (mounting parts, connecting parts, skirts and gaskets) Tools needed: ½" sleeve, impact gun for all connections and accessories Approval: UL 2703 for grounding/connection, Class A fire class 1 And 2 types of modules, UL certified modules, stamped structural engineering reports
How to install: RL-U is designed so that each installation step is independent, and a single installer can install the entire system. The roof attachment is a Flash Track, which provides north-south adjustability, and is fixed with an Umbrella Lag through SnapNrack's patent-pending Umbrella Flashing. RL-U only needs one RL-U installation SKU, which is used in all positions on the array. The integrated RL-U skirt connects to the first row of mounts, creating a powerful structure for leveling and aligning the array. RL-U Links are clamped on the top of the modules to fix them in place, while providing row-to-row connections and connection points for 2-4 modules. A single installer can put the modules in place and fix them on the top without having to cross the modules to reach the roof.
Advantages: RL Universal aims to provide the fastest and most intuitive roof installation experience. The direct installation system has four basic components, no more than one module in size, so that materials can be easily managed. Features include integrated skirts for safe installation, stylish and beautiful, universal mounts for use in all positions on the array, and links that can accommodate 2-4 modules. Unparalleled installation offset and link adjustability eliminate installation and link interference. RL-U is the only trackless system that provides a labor-saving installation process, supported by leaders in the residential solar industry.
Number of pieces: 2 (SpeedSeal feet or SpeedSeal rails and lag screws) Tools required: ½" sleeve with impact gun for all connections and accessories. Certification: UL 2582 Wind Driven Rain Test and ASTM E2140 Water Column Test Standard, UL 2703 Grounding/bonding, Class A fire protection class 1 and class 2 modules, UL certification module, stamped with structural engineering report
How to install: The new SnapNrack SpeedSeal products SpeedSeal Foot and SpeedSeal Track allow installers to drag directly onto structural members without intermediate components, which greatly speeds up the installation process and eliminates shingles damage during the installation process. The simple installation process includes positioning the rafters, filling the sealant cavity, and securing to the roof. As SpeedSeal feet or SpeedSeal tracks are fixed to the rafters, SpeedSeal technology takes over the work, compressing the sealant into the cavities, shingle surfaces and hysteresis holes.
Advantages: SpeedSeal feet and tracks use fewer parts and tools to save installers time on the roof, while maintaining the integrity of shingles. In order to properly install the rigid metal waterproofing board, a pry bar needs to be used to "tear" the shingles and remove the nails. SpeedSeal Foot and Track eliminates this process, so the roof remains intact, as the roof manufacturer means, and installation is faster. SnapNrack's single tool installation tradition continues in these new SpeedSeal products with the same ½” sleeve.
There are plenty of video interviews and other content on our YouTube page. Recently we launched Power Forward! - Collaborate with BayWare to discuss higher-level industry topics and best practices/trends for operating solar business today. Our longer-running side project is The Pitch-we have awkward discussions with solar manufacturers and suppliers about their new technologies and ideas so you don't have to. We discussed everything from residential trackless deck connections and home solar financing to large-scale energy storage value stacking and utility-driven new home solar storage microgrids. We also posted our annual project announcement there! Interviews with this year’s winners will begin in the week of November 8. Go there and subscribe today to learn about all this extra content.
©2021 Copyright Solar Builder Magazine | Wordpress website provided by OuterBox